Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Aprilaire Register & Grille Cleaning: The Alpharetta Owner’s Guide
Aprilaire register and grille cleaning in Alpharetta typically runs $89 to $189 for a full-home service when bundled with duct cleaning, or $12 to $25 per register/grille as a standalone detail. We stock Aprilaire-compatible replacement registers and grilles on the truck and can swap damaged units the same visit. Most Alpharetta homeowners discover the problem when they pull a grille to check the filter and find years of caked dust, rust bloom, or a bent damper blade that no longer opens fully.
Here’s the reality: the register is the last twelve inches of your duct system, and it’s the only part you actually see. When it’s clogged, your Aprilaire system works harder to push air through a shrinking opening. You feel the difference in rooms that never quite reach the thermostat setting. Roy Castellanos has spent the better part of two decades cleaning duct systems across Alpharetta, including a stretch of older two-story homes near Windward Parkway where the debris buildup told a story about exactly how long those systems had been ignored. The registers were the tell.
Which Aprilaire Models This Applies To
The register and grille cleaning process applies to every Aprilaire whole-home air system installed in Alpharetta homes, but the replacement part compatibility depends on your model line. Aprilaire’s current residential lineup uses standardized register face sizes: 6″ x 10″, 6″ x 12″, and 4″ x 10″ boot openings are the most common in Georgia construction. Older Aprilaire installations, particularly those paired with the Model 2200 and 2400 media air cleaners from the 2000s, often used 8″ x 14″ or 10″ x 10″ floor registers that are harder to source locally if you do not know where to look.
Here’s the compatibility gotcha we see regularly in Alpharetta: the Aprilaire model number on your air cleaner has nothing to do with your register size. The register fits the duct boot, not the Aprilaire unit. So the right move is to measure the boot opening, not read the Aprilaire label. You will need the length and width of the opening where the register drops in, not the outer face dims. And here is where it gets interesting: some Alpharetta homes built in the 1980s and early 1990s have non-standard boot openings that require a custom-cut grille. We carry a range of OEM Aprilaire-fit registers plus quality aftermarket equivalents in standard Georgia sizes, and we can order the oddball sizes from our Alpharetta supplier within two business days.
One more thing worth knowing: Hollis Air Duct Alpharetta is an independent service provider, not affiliated with Aprilaire. That means we are not locked into selling you Aprilaire-branded trim when a quality aftermarket grille at half the price does the same job. We will show you both options and price them in writing before we touch anything.
Styles & brands we work with




Signs Your Aprilaire Register & Grille Cleaning Is Failing
- You can see gray or black fuzz around the grille vanes. This is caked dust and micro-debris that has bonded to the metal. It restricts airflow and sends whatever is trapped back into the room every time the blower cycles.
- The damper lever is stiff, frozen, or broken off. Dampers on Aprilaire registers are thin metal. In Alpharetta’s humid summers, the metal swells and the pivot rusts. A frozen damper means that room cannot be balanced, period.
- Rooms at the end of the longest duct runs never get comfortable. Your Aprilaire system is delivering air, but the register at the far end is choking it. The grille is the cheapest restriction to fix, yet it is the one most owners overlook.
- Paint overspray or rust means a previous owner never removed the grille for maintenance. Paint seals the vanes in place. Rust means moisture backed up from the duct. Both are signs the register has been ignored for years, and both are worth addressing before they spread to the boot and duct.
- You hear a rattle or whistle when the system runs. A loose damper or a bent vane vibrates against the frame. It is a small noise that announces a smaller airflow opening, and your Aprilaire system is now working harder to compensate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Alpharetta homes, Aprilaire-compatible register and grille replacement runs $28 to $75 per unit installed, depending on size and finish. A full-home register and grille cleaning service, covering every supply register and return grille in the house, runs $89 to $189 depending on home size and the number of registers. We write the total price down before any work starts, and that number does not move when the technician is standing in your hallway.
Every register and grille cleaning includes removal of each unit, degreasing and debris removal from the vanes and frame, inspection of the damper mechanism, cleaning of the visible boot opening, and reinstallation with proper airflow alignment. If a register is too far gone to clean, we show you the damage, quote the replacement, and do not proceed until you approve the written price. The work is covered by the 365-Day Done Right Promise: if the register clogs again or the damper fails within a year, we come back and make it right at no charge. That includes a free second visit, in writing, on every job.
DIY or Call Us?
You can safely do a few things before calling: remove the register from the boot, tap out the loose dust over a trash can, and wipe the face with a damp microfiber cloth. That is honest maintenance, and it is worth doing twice a year. What gets Alpharetta homeowners in trouble is going further: prying apart welded vane assemblies, bending damper blades back into shape with pliers, or sanding rust off and repainting without stripping the old finish first. Once the vane geometry changes, the register never sits right again, and you end up paying for a replacement anyway, just later and after fighting the airflow for a season.
There is no high-tension danger in a register, but there is a fact worth respecting: once the metal is bent, it is bent. We replace, we do not rebuild. If your Aprilaire registers are beyond a wipe-down, call (762) 769-7145 and we will bring the right sizes on the truck and price them before we turn the first screw.
FAQs
In Alpharetta’s warm, humid climate, a steel or aluminum register lasts 15 to 25 years before the damper mechanism or the paint finish gives out. Cheap hardware-store replacements can fail in as little as 5 years because the damper pivot is thinner and the finish is not designed for sustained air-conditioned humidity. Galvanized steel registers hold up best.
Clogged registers can almost always be cleaned. Rusted damper pivots or bent vanes usually cannot be repaired in a way that is worth the labor cost. We will clean everything we can and tell you plainly which units should be replaced, with the cost written down before you decide. Call (762) 769-7145 for a straight answer on yours.
A full-home register and grille cleaning in an average Alpharetta house takes 45 to 90 minutes, depending on how many registers you have and how much buildup has set in. Replacement of individual registers adds 10 to 15 minutes per unit.
Yes. Our Alpharetta trucks carry the most common Georgia sizes for Aprilaire-fit registers and grilles: 4″ x 10″, 6″ x 10″, and 6″ x 12″, in white and satin nickel finishes. We also stock replacements for Lennox, Trane, and Carrier systems. If your size is not on the truck, we order it and return within two business days to finish the job.
Written by Roy Castellanos, Owner, Hollis Air Duct Alpharetta at Hollis Air Duct Alpharetta, serving Alpharetta and nearby areas.